KERMIT is a file transfer protocol developed at Columbia University. It was named after Kermit the frog, one of Jim Henson's popular muppets. KERMIT uses seven or eight data bits per character. The protocol is designed to convert the eighth bit by stripping it and prefixing the resulting character with another character. Doing so enables operating systems that cannot support eight-bit data characters or certain ASCII control characters to support file transfers in which those characters are disguised.

KERMIT is however 10-20% less efficient than the XMODEM protocol, and should only be used for accessing computers that cannot handle eight-bit characters.

Kermit is the name given to some communications software that was originally developed in 1981 at Columbia University, New York, for file transfer between different computers. It is named after the muppet Kermit the Frog.

As it was ported onto an increasing number of operating system and hardware platforms, Kermit rapidly grew into a piece of software that could get any machine to talk to any other machine. If Perl is the universal Swiss army knife or Swiss army chainsaw, Kermit is the universal hosepipe adaptor.

What is Kermit?

Kermit is a file transfer program and protocol. The program also provides terminal emulation and a scripting language.

How Kermit happened

The job that Kermit was designed to do was file transfer between two computers connected together over a serial link. However, to do this requires setting up the serial ports on either side of the link. This requires that one end of the wire is the client, and one is the server.

It is usual that the client will need to set up the port at the other end. To achieve this, the client needs to connect through to the server and log in, then run the Kermit server sofware.

To do this, the Kermit client software needs to pretend to be a terminal on the server. In the old days, you would be connecting to the client from a terminal anyway. All that happens is that the Kermit client works in connect-thru mode, and passes every ASCII character from the terminal to the line, and echoing back what appears on the line. A special control character is required to escape from connect-thru to command mode - this was usually <ctrl-\> or <ctrl-]>, as these characters are extremely rarely needed.

If the client is a Unix box, the same still applies. But if the client is a desktop machine, such as a PC, Mac, BBC micro, etc. terminal emulation is required to make the desktop machine behave like a Dec VT100 / Wyse / whatever, and obey all the escape sequences, key mappings and cursor controls that the device supports.

Over time, terminal emulation became important in its own right, as you could use it to run Unix and mainframe applications from a PC without needing a terminal. Kermit is often used to do just that, without ever using the file transfer facility.

Also, the facility was available to automate the login sequence: How to get the server computer's attention, username, password etc. and the sequence of prompts expected from the remote end. This grew into a full blown scripting language, useful for more than just logging in. Kermit scripting can be used as a form of automated test tool.

Criticisms levelled at Kermit

  1. Kermit is obsolete

    The ubiquity of the Internet, with TCP-IP and the FTP application, has removed most file transfer needs for Kermit that existed 20 years ago. However, not to be outdone, the latest versions of Kermit can be used to connect with terminal access over the internet with SSL.

    Who needs terminal emulation? Ask a Unix developer or SysAdmin. Unfortunately, Kermit does not provide an X-Terminal application for its terminal, so loses favour among the Unix folk to the likes of Hummingbird and Walker Richer and Quinn, whose terminal emulation software: Exceed and Reflection respectively, does run over X-Window.

    In terms of terminal scripting, there is more flexibility in using a scripting language such as Python, Tcl or Perl. Also, there are many more testing tools available, in which the scripting can drive the mouse and/or access Windows objects directly.

  2. Kermit file transfer is slow

    There is a benchmark on the Kermit website (see below) that I do not quite believe. The kermit protocol works on 7 bit ASCII, and introduces an overhead on any 8 bit characters. Any lightweight protocol such as XMODEM will win, especially for transmitting binary or unicode files.

    However, if you are talking about how to use a dedicated line optimally, The TCP-IP approach loses to Kermit, as there is an overhead of FTP over TCP-IP over PPP.

  3. Kermit is hard to set up

    In my opinion, Kermit is just as hard to configure as the other terminal emulation packages mentioned.

The Kermit website: presents a sales pitch to try and counter the three criticisms above.

Where Kermit is useful

Kermit will work over anything from wet string(qv) to Internet secure sockets. It is also available for a very wide range of platforms, including many machines which do not support TCP-IP access.

Also, Kermit is useful for technical support, to gain access to machines that are off the net. There may be security requirements to limit access to a secure leased line or a dialback; Kermit provides the end to end communication, with a file transfer facility thrown in as a bonus.


Kermit was one of the first really popular public domain programs. It pre-dated, the GNU General Public License, and allowed the software to be commercially exploited in several unforseen ways. Commercial software vendors were able to include "Kermit file transfer" as an option in terminal emulation software.

The original software was free and open source. However, the Win32 version of Kermit is not, and the Kermit project is dependent on sales revenue from this and commercial licences. Their site goes to great lengths to defend their position and attack open source development.

Kermit is a name with a very complicated past. Essentially, it means 'son of Dermot'. We do not know what Dermot means, but one of the more educated speculations is that it comes from (without) and either airmit, (injunction) or airmait (envy). Either way, the Irish patronym MacDermot arrived in the Isle of Man during the period of Celtic settlement (~700-800 A.D.). As the Mac- slowly faded from Celtic names, the 'k' sound was moved to the beginning of the following syllable, and the 'ma' dropped altogether.

And that was mostly that. The Isle of Man isn't a big player on the world stage, and Kermit would have gone down in history as one of a hundred thousand unusual family names if it hadn't been for one particular descendant and the fun American habit of using last names for first.

U.S. President Theodore Roosevelt had a Manx ancestor by the surname of Kermit, and named his third child (but second biological child, and thus the second child named by him) Kermit Roosevelt. Kermit had a rather exciting life, but suffered from alcoholism and depression, ending his life with suicide.

Kermit Roosevelt had two towns (Kermit, Texas and Kermit, West Virginia) named after him, along with a Luzon-class repair ship, the USS Kermit Roosevelt (ARG-16). Perhaps of more interest to Kermit's ghost is that Kermit Roosevelt, Jr., Kermit Roosevelt III, and Kermit Roosevelt IV all went on to have distinguished careers in the government and law.

This put Kermit back into the spotlight, this time as a given name. It became fairly popular in America, peaking in 1909-10 when Franklin Roosevelt left office and took his son (then in college at Harvard) on an expedition to Africa, but with a second spike in 1914 when the Roosevelt-Rondon Scientific Expedition returned from Brazil, followed shortly by Kermit's marriage to Belle Wyatt Willard, and a third, even smaller peak in 1919, the year of Franklin Roosevelt's death.

Kermit was a well established name by the 1940s and 50s, and when a young Jim Henson was naming his Muppets he chose the name (for no apparent reason) for his central character, Kermit the Frog. This is now the primary association that Americans (and, I suspect, the rest of the civilized world) have with the name Kermit. Since the initial frog-naming in 1955, Kermit has slowly decreased in popularity as a given name. While it peaked in popularity in 1909 (175th most popular name in America!) it dropped permanently out of the top 1,000 names in 1978.

Log in or registerto write something here or to contact authors.