A terrifying machine
frequently found in wood shop
s. It consists of a flat table
, usually marked with some guide
s and measurement
marks, with a slot
in the middle. Protruding from the slot
, not unlike a shark
, is a wicked circular saw
blade powered by a large electric motor
underneath the table. On your classier
models, this motor is mounted on a pivot
that can be adjusted so that the blade cuts at different angles.
When it is running, the table saw tends to make a bone rattling shriek that suggests it gains its power from souls of the damned and fingerless rather than plain old alternating current. The worst part of it is that you need to cut boards and planks with the saw by standing directly in front of the blade and pushing your wood towards the blade slowly and steadily. This can get quite scary when the saw is almost all the way through your wood, because if you aren't carefull, your steady application of force will cause you to lunge forward towards the blade once it ends its cut. Just about any old wood shop operator can tell you a few stories of people that have lost fingers or worse this way.
I almost forgot: If you don't want your piece of wood to shoot off the table, fly across the room, and embed itself into some hapless piece of machinery or flesh, then you need to feed your wood into the saw against the rotation of the blade.