Summary
A Buoyancy control device (otherwise known as a BCD, or Buoyancy compensator) is a piece of equipment used in SCUBA
Diving.
What is it used for
The BCD is used to control your buoyancy in water when SCUBA diving by
filling or deflating with air. This allows you to alter your depth under water
without having to "swim" up or down.
By careful, or learned manipulation of the amount of air inside the BCD, you can
achieve a state of neutral buoyancy, which is as close to being weight-less as
you can be unless you are a pilot (or know one), or an astronaut. (Or in the
case of recent events, have a lot of money and can afford a trip on a Russian
rocket into space). Once you have achieved neutral buoyancy, you can then
concentrate on looking around rather than staying down near the bottom (or up
slightly off the bottom).
The BCD can also be fully inflated on the surface to bring you higher out
of the water, for visibility, safety and comfort reasons.
How does it work?
The BCD contains a bladder which can be manually or mechanically
inflated. When manually inflating the BCD, you blow air through a one way
valve into the bladder. Mechanical inflation is done by releasing air from your
air tank into the BCD through a connection from your primary/first stage
regulator.
Air is released from the BCD by a simple controlled purge valve. Though many
BCDs' have an emergency purge or dump valve that rapidly deflates the BCD. This
valve is usually located on the shoulder, or the lower back of the BCD and is
useful if you are rising too fast or are trying to purge the last amount of air
from your BCD (an indication you need more lead weights).
The usual position for the manual and mechanical inflation and the
controlled purge device is in a tube which extents from the shoulder down.
Types of BCDs
There are three main types of BCDs today, although there have been many in
the past, and there are a number of variants available today. These types are
the front mounted, back mounted and jacket style.
Front mounted
Although they tend to be cheaper than the other styles they are usually the
least preferred style. The
air tank is mounted separately using a harness, and
the BCDs
bladder is on your chest. This style has the major disadvantage of its
tendency to flip you on your back, which while moving underwater is
controllable, while stationary can be rather frustrating. On the surface is
allows you to swim on your back which although is more comfortable, doesn't
allow you to see where you are going.
Back mounted
The back mounted design has the bladder located on your back, usually on
either side of the air tank. The advantage is it properly rights you underwater
so you are on your stomach, however the disadvantage is it can cause problems on
the surface. Back mounted BCDs tend to flip the swimmer on their stomach on the
surface when unconscious, which can lead to drowning. (Think of the case where a
diver runs out of air and does an emergency ascent). There are a large number
of people who swear by back mounted BCDs, and as is the case with everything;
to each his own.
Jacket style
The jacket style is the most common style available today. It is worm much
like a jacket, and has the bladder located primarily on the sides of the BCD
(Where the pockets of a normal jacket would be). The jacket tries to offer the
best of both worlds from the Front and Back mounted designs. It doesn't have the
tendency to flip you over underwater, and allows both swimming on your back and
front on the surface. It also doesn't force a swimmer on their front. (though
unlike with the back mounted style, it can still happen).
Features
Since the most common BCD today is the jacket style, I will discuss features
found on it. The other styles do share some of these features. All BCDs have a
bladder which can be filled and emptied of air. This is the primary purpose of a
BCD. The methods of inflating and deflating are discussed above.
Air tank attachment
All BCDs (except the front mounted style where the air tank is worn
separately) have an attachment for the Air tank. This is pretty much the most
important feature of a BCD after the bladder, after all, without air, you aren't
SCUBA diving, you are free diving. The method of attachment is usually a
ratchet style material belt which goes around the tank and uses friction to stop
the tank from slipping out. The other attachment method is a small loop that
goes around the top of the tank which is used in conjunction with the main
method as a backup. If you were purchasing a BCD, make sure that it has padding
between the tank and your back.
Pockets
Very useful since wet-suits don't have any (usually, though I have seen one
or two that do!). Used to store anything from torches (flashlights), emergency
sausages, knives, your car keys (oops, don't loose those 30ft. down), etc. Not
much to note other than the pockets have a mesh component to avoid collecting
water.
Attachment points
These are clips,
D rings, etc that allow you to attach various things to your
BCD, usually your inflation control,
gauges,
dive computer,
knife,
torch,
pony bottle etc. Generally anything that won't fit in a pocket, or
needs to be seen/reached easily.
Inflation control
Generally a tube/hose leading from the shoulder that contains a few buttons. One
will inflate the BCD from the air tank, another will purge air from the tank,
and a third (sometimes found) will open a one-way valve to allow manual
inflation. (If that button doesn't exist, you blow into the tube while
depressing the deflate button). Some BCDs have an integrated inflation control
which is located near the bottom of the BCD rather like a small arm rest.
Integrated weights
Some BCDs have special pockets for lead weights to be placed. If you are
lucky enough, you can carry enough weights in these pockets such that you don't
need to wear a weight belt. However it is important to use only these special
pockets or a weight belt to store weights, as they are designed for rapid
release in the event of a problem. The disadvantage of integrated weights is it
makes the BCD even heavier. The BCD is already attached to the air tank, so
another 12kg of lead makes it more difficult to lift the BCD out of the water.
Dump valves
Most BCDs have at least one dump valve that will rapidly deflate the BCD. The
most common location is on the inflation control tube, by pulling on the tube a
valve on the shoulder opens up. However, please check before you dive
your BCD has such a feature. Ripping the inflation control off your BCD while
underwater can have undesirable effects!
The other location for dump valves is the opposite shoulder to the inflation
control and on the lower back. This is a New Zealand divers favourite dump
valve since we usually are upside down head first in a hole looking for
Crayfish, and by reach back and dumping you can stop yourself from floating
feet first out of the hole.
Overpressure relief valve
If you over inflate a BCD, almost all modern BCDs have a relief valve that will dump the excess pressure.
Harness
The harness is used to attach the BCD to your person. It should be comfortable, easily readjustable, and able to fit when wearing a wetsuit (7mm adds a lot of bulk)
Sources: The PADI Open Water diving
manual, numerous web
sites, personal experience, and conversations with other divers.
Disclaimer: The above represents my opinion on BCDs.
Although I speak from some experience, and have referred to multiple sources when
creating this node. I may be wrong. As such, please feel free
to /msg me any corrections.