Summary

A String Tripod is essentially a screw with a piece of string tied to it, used in photography to stabilise a camera.


Why?

The main problem of taking photos free-hand is that your hands aren’t particularly sturdy. Myself, I find using a heavier camera makes it a lot easier (the inertia of the camera means it is reluctant to move, so up to a point, a heavy camera is easier to hold still for the duration of a photographic exposure than a very light camera.), but what for lighter cameras?

The obvious answer is a tripod or a monopod, but these devices can be terribly heavy, and they are not particularly portable. One solution is to hold the camera against a surface (a tree, a building, or a signpost), but that doesn't always work either, and none of these items offer an awful lot of flexibility.

How?

I often find myself thinking "Damn, if there was only a way to anchor the camera to the ground...", and I recently found a solution that works: A String Tripod! It is a laughably simple device: You get a wing nut bolt (or anything that screws in) that fits into the tripod hole of your camera (you are looking for a bolt with 3.5x8" threads), and drill a small hole into the bolt. Then, you attach a length of string to it, with a loop at the end. If you use the shearing lines available for tents, you can vary the length of the loop, and, as such, the height of the camera.

To use one of these string tripods, put your foot (or feet) through the loop, and pull the string taut against your foot. Now, out of nowhere, your camera will be a lot more stable, as it has an axis against which it cannot move (up/down). This means that you can hold the camera a lot calmer - you would be surprised how much of a difference this can make!

But...

Sure, it will never replace a proper tripod or monopod, but I wouldn’t be surprised if you gain a couple of stops on your shutter time by using this system. And the best thing? Making one of these is going to cost you less than a bottle of milk and a loaf of bread!

Also

One enlightened noder informs me that these things are also known as chainpods.

adopted from an article I wrote for the Photocritic DIY photography blog

Log in or registerto write something here or to contact authors.