Used in networking and telecommunications, a patch panel is pretty much a junction box. All communications wall cable should be punched down to a patch panel, with jumper wires connecting the circuit to its final destination (say, your server).

Why use a patch panel? Well, apart from it being the professional thing to do, the cable at the end of a run is typically the cable that breaks first. When (not if) the end of your cable circuit breaks due to physical back-and-forth, it is easily replaced -- if you've used a patch panel and jumpers. If you haven't, you'll have to figure out where it's broken, then punch down another length of cable. Troubleshooting where a cable is broken requires a time domain reflectometer, and it's a pain in the ass. If you're using fiber, the OTDR required is highly expensive. It's just better to use a patch panel in the first place. The cables punched down to the patch panel don't move, so they don't break nearly as often.

Log in or registerto write something here or to contact authors.