both the name for AMD's new, Athlon-based CPU (what used to be known as the Spitfire, FAQ at, and also the type of polyurethane material that goes into one of the brands of Durex condoms (

wonder if the bigshots at AMD know what else Duron stands for other than Latin for "durability" ... hehe...

The Duron is also one of the most overclockable processors currently on the market, in other words it has replaced the Intel Celeron as the official overclocker's dream.

A friend of mine bought a 600MHz Duron last week, and we experimented in overclocking it last night. It now runs stable at 896MHz, with standard cooling, and without any other fancy overclocking tricks. Thats almost a 50% increase in speed, without forking out any extra money. All hail AMD!
Origionally this write up was under the node Spitfire but was moved to this node at editor's appeal.

Ah... the code name for the now named 'Duron' processor. A very nice processor indeed. It is known as the little brother to the Thunderbird processor.

Processor Specs:

Bus Clock: 200 MHz (DDR)
L1-Cache Size: 128k
L2-Cache Size: 64k
L2-Cache Interface: 64-bit
Platform: Socket 462
Chipsets: VIA Apollo KT133, AMD750, 760
Performance: about 90% of Athlon/Thunderbird at same clock frequency, 92 - 99% of Athlon Classic at same clock frequency.

The motherboard I would use, or should say, going to use, is the Abit KT7-Raid. Goto Abit's web site for info on the board. It's

Cheap, and just bursting with overclockability (My 800 is running 1 gig perfectly stable and not too hot. Unf Unf Unf).

Wanna overclock that shiny new Duron? Here's how to unlock the multiplier:

Pull your chip out of your motherboard, if it's in there right now. Clean all the thermal grease (you did use that, didn't you?) off the chip. Sharpen a soft pencil -- #2 or less, and mechanical pencils don't work as well as normal wood pencils. And I'm really serious about sharpening it. You want as fine a point as you can put on the lead.

Now, orient the chip so the AMD symbol is right-side-up. There should be a raised metallic box in the center of the chip (about 1cm * .75 cm), with a row of 5 small rectangles above and below it. On the right side, there are 3 more little rectangles. To the right of those, there's some very small dots, lines, and writing. Rotate the chip 90 degrees counterclockwise so the writing is right side up. Here's as close an image of that as I can make in ASCII, copied from a duron 750. Your chip may be slightly different when it comes to lines vs. dots:

L1 . : : : :  . | | L2
L3 * : | | :  * | : : | L4
Okay. Each colon is called a bridge. What you want to do is connect each pair of the four L1 bridges -- turn each of the four colons to the right of the L1 label into a pipe. Don't get any lead that connects two sets of bridges. That's bad. If you do, you lose your chip when you power it up. So get a magnifying glass if you can't see them, and triple check that there's no lead connecting the sets of bridges. However, you do want a solid connection, so put a lot of lead over the bridge.

That's it. Plug it in, slap a quality heatsink on it, boot it up and start playing with the multiplier setting in your BIOS (or, horrors, fiddling with jumpers if you've got a stone age mobo). No soldering or tape like in the old celerons. Just a pencil. Some hardcore overclockers insist on using car defroster repair kits, which is essentially metal made to go on liquid-like and dry permanent. Certainly seems more reliable...but you can't use an eraser if you fsck up.

Oh, and a picture in this case is worth...well, a whole lot of words. Do a search for duron multiplier unlocking and check out some pictures of what you'll be doing.

The AMD Duron is mostly identical to its Athlon siblings. What differentiaties this CPU from the Athlon is its cache-- it has just 64k of L2 cache, whereas the Athlon has a full 256K. Like its more expensive counterpart, the Duron has a 128K L1 cache, but the L1 cache (that is, the data and instruction cache) of the Athlon is 16-way associative; the Duron's is only 2-way associative.

According to AMD, the name "Duron" is a combination of the Latin root "durare" (to last) and the suffix "-on," which means "unit".

There are two Duron cores: the Spitfire, which runs from 600MHz to 950MHz, and the Morgan, which includes Durons that are 1GHz and up, IIRC.

The Advanced Micro Devices Duron, a Socket 462/A CPU, was released in April 2000 and first shipped(*) on June 5th, 2000. The AMD Duron was the budget version of the AMD Athlon, slower and cheaper. Just as Intel's Pentium IIIs had the Celeron, the Athlon had the Duron. While the Duron received what can only be described as moderate fanfare (it shipped on the same day AMD released the Athlon Thunderbird, a processor that would become famous for its low price and high speed), it still had quite a large market to cater to, and hardly went ignored. It has been replaced with the Sempron.

This first Duron used the Spitfire core(**), which was based on the Athlon's Thunderbird core. It had a 100MHz frontside bus, but it used the Alpha EV6 bus, meaning that it effectively had a 200MHz bus speed. It had 128KB of L1 cache (same as the Thunderbird in every way; both are 2-way set associative(`)) and 64KB of L2 cache (the Thunderbird had 256, but both are still 16-way set associative(`)). The Thunderbird would also later scale to a 133MHz (effectively 266MHz) FSB while the Duron was left at 100MHz. While no cost savings were made on the lower bus speed, less cache meant the CPU die was smaller, which meant they could make more CPUs per wafer, which meant lower production costs, which meant a cheaper CPU for the end user.

Initially released at 600MHz, 650MHz, and 700MHz(***), the Duron's job was to compete with the Coppermine 128 Celeron. The Celeron was still operating with a 66MHz FSB at this time, while the Duron effectively had a 200MHz FSB. The Celeron did have more L2 cache (128KB to the Duron's 64KB), but it had only 32KB of L1 cache (as did the Pentium III). Also, the Celeron's L2 cache was alarmingly inefficient; Intel was basically taking Pentium IIIs with partially nonfunctional cache and selling them as Celerons, which meant the L2 cache was 4-way associative. The Duron's L2 cache was 16-way associative, if you're wondering.(`) Also, the Celeron's was inclusive, meaning that the L1 cache had to be mirrored in the L2 cache, essentially leaving it with 96KB of L2 cache instead of 128KB. The Duron's was exclusive. Taking all of this into account, it's not hard to see why the Duron beat the pants off of the Celeron.

Every time the Celeron was pitted against a Duron of equal clock speed, the Duron performed anywhere from 10% to 30% better in both artificial (SYSMark 2000) and real-world (Quake III) benchmarks. Additionally, the Duron was cheaper. All the Celeron had left was its almost-legendary overclocking ability-- and the Duron was shaping up to be quite the overclocking chip as well. What's more, if you had a pencil and five minutes, you could unlock the multiplier, meaning that you no longer had to rely on risky FSB adjustment to overclock. (See flamingweasel's writeup if you want to unlock.) Thanks to the Duron Spitfire, the only market for the Celeron had become stupid people.(``) The Spitfire core would later scale all the way up to 950MHz, and even when the Celeron was finally given a 100MHz FSB with the Celeron 800, it could not compete.

The Duron 1GHz, released in August 2001, wasn't the same as the Durons before it. It was based on the new Morgan core, which was the budget version of the Palomino core. If you don't recognize the name, the Palomino was the first-generation Athlon XP, meaning that the Morgan had all the architecture improvements of the Athlon XP (SSE support, data prefetch, and many more). This meant that instead of having the small ~5% performance boost you'd expect from a 50MHz clock upgrade, the new Duron at 1GHz was about 10-15% faster than the Spitfire at 950MHz.

But the market had changed. More specifically, the Athlon was now available at obscenely low prices. So even though the Duron Morgan was a significant improvement over the Spitfire, its market was considerably smaller. In the days of the Spitfire, the large cost difference between the Athlon and Duron had made the Duron a worthwhile choice; now, you could simply pay a few dollars more (about $20 US) and get a significantly faster Thunderbird. The end of the Duron was near. (And never mind the Celeron, it was priced at about the same level as some slower Thunderbirds. I hold that it should have died long ago.) AMD scaled the processor up to 1.3GHz in 100MHz increments, then simply stopped bothering, as the low-end Athlons offered superior speed at a very small price boost. And so the Duron quietly faded away...

... until in August 2003, AMD suddenly announced that they would release the Duron at 1.4GHz, 1.6GHz, and 1.8GHz, much to the confusion of the hardware community. The new "Applebred" Durons are based on the Thoroughbred-B core, with 192KB of the L2 cache disabled. The Applebreds also have a 266MHz frontside bus, same as the lower-end Athlon XPs. Lastly, the shift from .18-micron to .13-micron makes Applebreds cheaper to produce and helps heat output (smaller transistors can run at lower voltages).

What this doesn't explain, of course, is why AMD bothered. After many, many people asked what was going on, AMD explained that there was still a market in developing countries such as Russia and Mexico for a low-cost chip with reasonable performance. The Duron is famous in places like these for its low price and good performance, and AMD want to make sure that they're covering every single market available.

As noted earlier, Applebreds are Thoroughbred-Bs with 192KB of their L2 cache disabled. Some bored Russians (it's always the Russians) figured out how to enable all of the L2 cache, but warned that it didn't always work. AMD is probably selling Thoroughbred-Bs with partially nonfunctional L2 cache as Applebreds. This isn't always the case, of course, else these enterprising Russians wouldn't have been able to enable the rest of the L2 cache on theirs; I suspect that some Applebreds are semiborked Thoroughbred-Bs, and others might just be relabled Thoroughbred-Bs that haven't had all of their L2 cache tested and have only 64KB of it enabled so they can be sold as Durons. More information will be available as soon as I can find out just how often people can enable the cache on their Applebreds. Wow, I wish I spoke Russian.

For those who are curious about the Duron's performance, the answer is simple: it's the same as always, roughly 80% (occasionally 95%, occasionally 60%) as fast as an Athlon (well, Athlon XP) at the same clock speed. These chips are now available in countries such as the United States and United Kingdom, so if you're curious about the new Duron for whatever reason and live in the US or Western Europe it should be easy to get one for the time being (although they'll be getting trickier and trickier to find as time goes on).

The Applebred Duron was also the last Duron ever produced. AMD's next attempt at a budget line was called the Sempron.

* Hardware usually ships a few weeks after release, and with "paper launches", the gap between release and ship date has been steadily widening. There are some exceptions, such as the Intel 865 chipset, which was actually available before its official release through normal retail channels. A refreshing change of pace, to say the least.

** Cores (the "hearts" of CPUs) are always given names while they're in development, and hardware people like to call their processors by their cores (such as "Katmai 500") to avoid confusion; there are usually multiple cores for each processor, and there are notable differences between each type of core. Intel usually name theirs after random places in California, and lately AMD have been naming them after horses. I still say that "Spitfire" and "Thunderbird" sound way better than "Palomino" and "Morgan," but I guess they don't feel the same way. @&#!ing horses.

*** New CPUs tend to be released at three different clock speeds exactly. One means they're having serious yield problems, two means they're cocky, four or more means they're worried.

` If you would like to know more about what exactly this means, AnandTech explains it briefly here:

`` Okay, stupid is harsh; after all, not everyone cares about their CPU. But I feel that if you're going to blow a thousand bucks on a computer, you might as well make sure it's not a piece of crap. Would you buy a car without checking anything or asking anyone first? I'd certainly hope not.

Log in or registerto write something here or to contact authors.